The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

This is more than just WIP. hetii has started a serprog implementation on the ESP8266 and Stefanct will set up test hardware if that's ready. Till then this will host various ESP-related bits not necessarily related to Serprog.

UART

The default UART requires line feeds to be sent. This can be done by ending every line with '<enter> <ctrl>-j'. A more convenient solution is to use automatic mapping provided by a terminal emulator, e.g.:

picocom -b 115200 --omap crcrlf /dev/ttyUSB1

After boot you should see (at least) the ready message as below. You can test if the UART connection works correctly by issuing AT commands.

Ai-Thinker Technology Co.,Ltd.

ready
AT

OK
AT+GMR
AT version:0.40.0.0(Aug  8 2015 14:45:58)
SDK version:1.3.0
Ai-Thinker Technology Co.,Ltd.
Build:1.3.0.2 Sep 11 2015 11:48:04
OK

Documentation of AT commands

WLAN

To connect to an existing network one needs to

enable client mode
enable DHCP
connect to an AP

AT+CWMODE=1
AT+CWDHCP=1,1
AT+CWJAP="ssid","password"

Serprog/ESP8266 flasher

UART

WLAN

Navigation menu