Flashrom/0.9.4

From flashrom
Revision as of 21:41, 23 July 2011 by Hailfinger (talk | contribs) (Initial page creation from release template)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

Short summary for package changelogs

  • Support for new programmers: FIXME
  • Dozens of added flash chips, chipsets, mainboards
  • Improved user interface
  • Reliability fixes for buggy hardware, buggy third party software and corner case spec conformance

Release announcement

The flashrom developers are happy to announce the release of flashrom 0.9.4.

flashrom is a utility for reading, writing, erasing and verifying flash ROM chips.

flashrom is designed to flash BIOS/EFI/coreboot/firmware/optionROM images on mainboards, network/graphics/storage controller cards, and various programmer devices. It can do so without any special boot procedures and from your normal working environment.

After FIXME years of development and constant improvement, we have added support for every BIOS flash ROM technology present on x86 mainboards and every flash ROM chip we ever saw in the wild.

Highlights of flashrom include:

  • Parallel, LPC, FWH and SPI flash interfaces.
  • Support for onboard programming and external programmers.
  • FIXME flash chip families and half a dozen variants of each family.
  • Flash chip package agnostic. DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, TSOP40 and more have all been verified to work.
  • FIXME different chipsets, some with multiple flash controllers.
  • Special mainboard enabling code for dozens of nonstandard mainboards.
  • FIXME PCI devices, FIXME USB devices and all external serprog-based programmers can be flashed or used for flashing.
  • No physical access needed. root access is sufficient.
  • No bootable floppy disk, bootable CD-ROM or other media needed.
  • No keyboard or monitor needed. Simply reflash remotely via SSH.
  • No instant reboot needed. Reflash your ROM in a running system, verify it, be happy. The new firmware will be present next time you boot.
  • Crossflashing and hotflashing is possible as long as the flash chips are electrically and logically compatible (same protocol). Great for recovery.
  • Scriptability. Reflash a whole pool of identical machines at the same time from the command line. It is recommended to check flashrom output and error codes.
  • Speed. flashrom is much faster than vendor flash tools.
  • Supports Linux, FreeBSD, NetBSD, DragonFly BSD, OpenBSD, Nexenta, Solaris, Mac OS X and DOS. Please refer to the README for build instructions.

Thanks go to everyone who contributed to flashrom over the years.

Please note that rewriting your flash chip can be dangerous and flashrom developers make no guarantees whatsoever. That said, many users have successfully replaced proprietary tools such as awdflash, amiflash and afudos with flashrom.

flashrom has its own home page at http://www.flashrom.org/

New major user-visible features include:

  • FIXME

Infrastructural improvements and fixes:

  • FIXME
  • Improved error messages
  • Correctness fixes
  • Various workarounds for broken hardware
  • Code cleanups