serprog

From flashrom
Revision as of 13:13, 13 June 2021 by Th3Fanbus (talk | contribs) (→‎HydraBus multi-tool: Add more details about HydraBus)
Jump to navigation Jump to search

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

This page collects information about the serprog protocol and the programmers implementing it.

Protocol

See serprog-protocol.txt in the source tree. It is designed to be compact and allow efficient storage in limited memory of programmer devices.

Hardware

AVR flasher by Urja Rannikko

Prototype RS232 AVR parallel flash programmer

The Prototype RS232 AVR parallel flash programmer of Urja Rannikko was the first implementation of the serprog protocol.

The source code can be found here.

AVR flasher by eightdot

FIXME: Link?

InSystemFlasher by Juhana Helovuo

This was the first one that talks to SPI devices via serial over USB. Details can be found in the coreboot wiki and in this coreboot mailing list thread.

atmegaXXu2-flasher by Stefan Tauner

Like the InSystemFlasher this one uses LUFA on an AVR microcontroller to tunnel the serial data over USB.

atmegaXXu2-flasher with Pomona SOIC hook attached

Various Arduino based flashers

Frser-duino

This project contains source code to install on Arduino devices.

That person also have various ports on github for several microcontroller boards, such as:

There also vaious other interesting projects such as:

Using a 5v Arduino at 3.3V

Information on it can be found in the Arduino_flasher_3.3v page

5V arduino with level shifter

For detailed instructions on how to use different Arduino models to access SPI flash chips see Serprog/Arduino flasher.

Arduino Uno connected using a breadboard

Arduino Mega flasher by fritz

[1] [2] [3]

Some information is lacking on this flasher, such as the software used in it. Feel free to add information on it if you find some.

Teensy 3.1 SPI + LPC/FWH Flasher

A Teensy 3.1 based small flasher by Urja Rannikko.

HydraBus multi-tool

HydraBus (hardware) with HydraFW (firmware) is an open source multi-tool for learning, developing, debugging, hacking and penetration testing of embedded hardware. It is built upon an ARM Cortex-M4 (STM32F405). The source code for HydraFW is available on GitHub. Refer to their GitHub Wiki for more details on how to use HydraBus with flashrom.

HydraBus board with HydraFW default pin mapping

serprog-stm32vcp by Chi Zhang

The most powerful serprog-based programmer is built upon an ARM Cortex-M3 (STM32F103) featuring up to 36 MHz SPI clock. See his github page for further details, source code etc.

serprog-stm32vcp